Company | Ampoules | Vials | Bottles | Tubes | Caps & Seals | Glassware | Plasticware | Labware | Technical | Enquiry

Our range of plasticware can be used for many functions in the laboratory and is comparable to any international brand. Please contact us if you can't find what you are looking for as the list below doesn't cover our full range.

essco glass molded vials crimp neck Petri Dishes, Disposable
These clear polystyrene redy-to-use petri dishes are radiation sterilized and supplied with lids. They have excellent optical clarity and strength. Sealed individually in plastic sleeves. Available in diameter 35mm, 60mm and 90mm.
essco glass molded vials crimp neck Petri Dishes, Polypropylene
These autoclavable polypropylene ready-to-use petri dishes are radiation sterilized and supplied with lids. They have good clarity and unbreakable. Sealed individually in plastic sleeves. Available in diameter 50mm, 75mm, 100mm, 125mm and 150mm.
Essco Inoculation Loops and Needles Inoculation Loops and Needles
These disposable inoculating loops do not require flaming and thus eliminate the risk of infection due to aerosol formation of pathogenic substances. Smooth and flexible for uniform streaking without damaging the gel surface. Loops available in 1l and 10l. Inoculating needle are straight and suitable for removal of specimens of single colonies.
Essco L-Spreaders L-Spreaders
These disposable L-Spreaders provide an economical alternative to bending glass rods or pipets for spreading samples on agar surfaces and filters in Petri dishes. They are supplied sterile so no need to flame sterilize or autoclave.
essco glass molded vials crimp neck Stirring and Spreading Rods (Policemen)
A multi-purpose tool that works well as a stirrer as well as a spatula. (6mm x 24cm, pack of 12). Made of polypropylene.
essco glass molded vials crimp neck Micro Pestle Two-Sided
These two-sided polypropylene Micro Pestles fits 1.5 ml and 0.5 ml Micro Tubes
essco glass molded vials crimp neck Stir Rods
These stir rods are made of polypropylene and are rounded at both ends. Maximum temperature is 248F (120C). Autoclavable. Available in 250mm x 10mm, 200mm x 7mm and 15mm x 6mm sizes.
essco glass molded vials crimp neck Spoon and Spade Spatula
This general purpose double-ended spatula is corrosion free. Spoon end of the spatula can be used for lifting ingredients from containers and flat end with knife edge for cutting up and separating ingredients. Available in length 150mm and 200mm.
essco glass molded vials crimp neck Cryo Storage Box, Polypropylene (PP)
These autoclaveable box features cover which can be attached by hinges and has wells hold vials up to 2ml with alpha numeric index for easy identification. Can hold 100 vials of up to 2ml capacity.
essco glass molded vials crimp neck Cryo Storage Box, Polycarbonate (PC)
These durable polycarbonate boxes are ideal for compact storage of 1.2mL, 2mL, or 5mL cryogenic vials. They can be used in temperatures ranging from -196 to 121 degrees C (-321 to 250 degrees F). Clear lids allows writing and have a printed grid for easy inventory. Available in 50 places and 100 places for upto 2ml vials and 81 places for 5ml vials.
essco glass molded vials crimp neck Cryo Rack, Polycarbonate (PC)
Made from polycarbonate, these racks are tough, durable, autoclavable and can hold 50 vials of up to 5ml capacity. The unique feature of this rack is that vials can be unscrewed without actually picking or twisting them in the wells. This rack has anti-skid rubber feets and apha-numeric index for easy identification.
essco glass molded vials crimp neck Scintillation Vials Rack
These polypropylene molded racks for Scintillation Vials are autoclavable and corrosion resistant. These rugged and stable racks can hold scintillation vials for convenient storage, handling and sample preparation. Available for 90 vials of 8ml and 50 vials of 20ml.
essco glass molded vials crimp neck Micro Test Plates
Made from clear non-toxic polystyrene, these plates features uniform placement of all the wells facilitate use of multi channel pipettes. This plate has option of 96 wells of either U-Bottom or Flat-bottom wells with alpha-numeric index.
essco glass molded vials crimp neck Micro Tips Storage Box
These polypropylene boxes are autoclavable and provide excellent view of the tips. Tip wells facilitate the use of multi channel pipettes and box cover provides protection to the tips and can be easily disengaged from the bottom of the box. Available for 96 Micro Tips of 2-10l, 96 Micro Tips of 2-200l and 100 Micro Tips of 200-1000l.
essco glass molded vials crimp neck Microcentrifuge Tubes Box
Designed to work at temperatures ranging from -190C to +121C, these boxes are sturdy and comes with a transparent cover with printed numbers. Available with 64 places for 1.5ml tubes and 100 places for 0.5 ml tubes.
essco glass molded vials crimp neck Microcentrifuge Tubes Storage Rack
These polypropylene double-side micro tube racks are autoclavable, ideal for freezing, benchtop use, storage and transporting samples. Each side has 108 wells, one side holds 0.5mL microcentrifuge tubes and the other side holds 1.5mL to 2.0mL microcentrifuge tubes. Each side has a unique alpha-numeric index for easy identification. The transparent cover provides an excellent view as well as protection during transportation. Racks can be securely stacked.
essco glass molded vials crimp neck PCR Tube Rack
These stackable racks made of polycarbonate while the middle portion is made of polypropylene. The wells are uniformly placed to facilitate multipipettes use. This rack can hold 96 PCR tubes of 0.2ml capacity.
essco glass molded vials crimp neck Rack, Petri Dish
These Racks are clear acrylic construction with polycarbonate posts. These racks are very useful during inoculation, incubation and storage. Visibility from all sides enables the culture to be seen and checked during incubation. Available for 90mm and 60mm petri dishes.
essco glass molded vials crimp neck Floating Rack for Microcentrifuge Tubes
Made from polypropylene, these floating racks are autoclavable and can hold up to 16 microcentrifuge tubes of 1.5ml for incubation in water baths. The surface of the rack has raised alpha-numeric index for easy identification and has a central rod handle for convenient lifting.
essco glass molded vials crimp neck Rack, Draining and Drying, 20 Pegs
This rack provides an excellent option for post wash draining and drying of tubes and bottles in the laboratory. The back plate of the rack has 20 holes into which pegs are tightened with the help of screw-nuts. Bottom of the rack is provided with a tray which collects all the drained down water which can further be collected in a container via a drain tube.
essco glass molded vials crimp neck Rack, Pipette, Horizontal, 12 Pipettes
This white molded polyethylene rack will hold 12 pipettes over 200 mm long. Supplied as a kit of two end pieces and three connecting rods for easy push fit assembly.
essco glass molded vials crimp neck Rack, Pipette, Vertical, 28 Pipettes
This polypropylene rack is stable, non-corrosive, detachable and can hold 28 pipettes with maximum diameter of 14mm. The heavy base measures 23cm in diameter and a polypropylene coated square rod measuring 38cm in length is screwed into the base. The top disc has holes for holding the pipettes while the lower one has pilot holes where the pipette tips rest and liquids drain down to the base.
essco glass molded vials crimp neck Rack, Pipette, Vertical, 94 Pipettes
This rack can hold up to 94 pipettes and rotates on central vertical axis for convenient selection of any particular pipette. Central vertical axis measures 19" in height. The lower rotating disc has four concentric troughs with tapered sides and open bottoms which cradle the pipette tips protectively and permit water drops run off. This lower rotating disc measures 9" in diameter.
essco glass molded vials crimp neck Rack, Test Tube, Wire Pattern
These polypropylene racks are shipped flat for easy storage and easy to assemble: simply fold and snap together securely. Racks are Autoclavable at 121C for 20 minutes. Can be used dry, wet or in water baths and will not float. Can be used in freezers without deforming or going brittle. Will not rot, rust or deform. Stackable when empty. Holds 90 tubes/13mm, 60 tubes/16mm, 40 tubes/20mm, 24 tubes/25mm, 21 tubes/30mm.
essco glass molded vials crimp neck Rack, Test Tube, Pegs Pattern
These racks can conveniently hold inverted tubes for drying purpose and minimize collection of airborne contaminants inside the tube . The rack can also be used to hold and dry electrophoresis and chromatography plates. Can hold 50 tubes of up to 16mm diameter or 95 tubes of up to 13mm diameter.
essco glass molded vials crimp neck Rack, Test Tube, Circular
This circular 12 place polypropylene test tube stand has four 25mm diameter holes and eight 19mm diameter holes. The base has matching wells and 16 drying pins surrounded by a trough to catch drippings.
essco glass molded vials crimp neck Rack, Test Tube, Multi-Size
A very sturdy one-piece molded polypropylene multi-size rack. All four sides can be used interchangeably for 12 mm through 25 mm diameter tubes. Rack features a total of 88 spaces on its four sides. Dimensions: 8" x 4" x 4.5".
essco glass molded vials crimp neck Rack, Test Tube, Straight
A simple and useful rack with six holes of 25mm diameter and 6 draining pegs. Supplied flat and is very easy to assemble for use or disassemble for storage.
essco glass molded vials crimp neck Rack, Test Tube, Three Tier
A sturdy high-impact three tier polypropylene rack will hold up to 72 test tubes of diameter 13 mm to 32mm. Easy to assemble and clean. Chemical resistant.
essco glass molded vials crimp neck Retort Support Stand
These corrosion free, polypropylene moulded Retort Stands provide excellent replacement for the metal ones. Polyethylene coated metal rod screws into the base giving way to a perfectly stable Retort Stand. Base sizes are 225mm x 150mm and 300mmx200mm. Rod measures 12.5mm x 750mm.
essco glass molded vials crimp neck Reagent Reservoir, 75ml)
These autoclavable reservoirs are well suited for single and multichannel pipetting.
essco glass molded vials crimp neck Micropipettes
We supply high quality micropipettes and accessories for use in Clinical, Research and Industrial Laboratories. Range includes all types of fixed volume, automatic pipettes, single channel Pipettes, multichannel, bio-clean pipettes, electronic pipettes, truly autoclavable pipettes, pipettes controlers and stands.
essco glass molded vials crimp neck Microtips
These tips are produced from high quality diamond finish mould using special medical grade virgin polypropylene with high transparency. Free from DNase, RNase, Human DNA, Pyrogen and PCR inhibitor. Ideal match for high sensitive PCR work. Available in different versions with different pack options.
essco glass molded vials crimp neck Pipettes Pasture, LDPE
Graduated in 0.5 ml increments up to 3ml and can easily dispense 1 drop at a time. Bulk packaging 100 per box. Disposable and Nonsterile.
essco glass molded vials crimp neck Pipette Pump with Quick Release Lever
Good quality pipettors designed for easy and precise pipetting. Pumps feature a lever for quick release, and forward or backward wheel movement. The soft elastic chuck has a threaded collar to tightly grip glass or plastic pipettes. Easy to clean. Available in capacity 2ml, 10ml and 25ml.
Pipette Filler, Rubber Pipette Filler, Rubber
This rubber pipette filler is used to safely draw liquids into a pipette. Release air with one valve, draw in liquid with another, and regulate/release liquid with a third.
essco glass molded vials screw neck Sampling Container with Spoon, 30ml
These aseptically produced polypropylene containers are used universally for collection of samples. Supplied with leak-proof closure with attached PP spoon. Capacity 30ml.
essco glass molded vials crimp neck Sampling Container Screw Cap, 50ml
These 50ml polypropylene containers with molded graduations are lightweight tapered containers and use leak proof screw cap. Ideal for storage of samples, powders etc.
essco glass molded vials crimp neck Sampling Container Snap-on-Lid, 50ml
These 50ml ETO sterilized polypropylene containers with molded graduations are lightweight tapered containers and use tight fitting LDPE snap-on-lid. Ideal for storage of samples, powders etc
essco glass molded vials crimp neck Beakers with Handle , Graduated)
These superior quality polypropylene beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. These beakers have a short-form and a pour spout to facilitate the transferring of liquids without dripping. Autoclavable at 121C with good chemical resistance. Durable and economical with clear, moulded permanent graduations. Available in capacity ranging 500ml to 5000ml.
essco glass molded vials crimp neck Beakers, Graduated
These superior quality polypropylene beakers are ideal for all general laboratory procedures. In one beaker you can mix, measure and prepare solutions. These beakers have a short-form and a pour spout to facilitate the transferring of liquids without dripping. Autoclavable at 121C with good chemical resistance. Durable and economical with clear, moulded permanent graduations. Available in capacity ranging 25ml to 5000ml.
essco glass molded vials crimp neck Burette, Acrylic
Acrylic construction for strength and transparency. Ideal for use in educational laboratories especially where breakages often occur. Unaffected by most dilute aqueous solutions. Turning the stopcock through 90 makes it suitable for left or right handed use. Stopcocks can be removed for easy cleaning. Available in capacity 25ml, 50ml and 100ml.
essco glass molded vials crimp neck Burette Clamps
These spring loaded polypropylene clamps are corrosion resistant and allow clear view of graduations along the full length of the burette. An interchangeable compression cone on the central boss provides a firm grip on rods up to 10 - 14mm in diameter. Available for single and double burette.
Connectors, X Shape Connectors, X Shape
These"X" shape four way connectors provides excellent leak-proof grip to the tube and made of polypropylene. Sold in pack of 10. Available in 6mm, 8mm and 10mm diameter.
Connectors, X Shape Connectors, L Shape
These "L" shape connectors provides excellent leak-proof grip to the tube and made of polypropylene. Sold in pack of 10. Available in 6mm, 8mm and 10mm diameter.
Connectors, X Shape Connectors, T Shape
These "T" shape three way connectors provides excellent leak-proof grip to the tube and made of polypropylene. Sold in pack of 10. Available in 6mm, 8mm and 10mm diameter.
Connectors, X Shape Connectors, X Shape
These "Y" shape three way connectors provides excellent leak-proof grip to the tube and made of polypropylene. Sold in pack of 10. Available in 6mm, 8mm and 10mm diameter.
Coplin Jar Coplin Jar
Made of polypropylene, this Coplin jar can hold 10 slides of the size 1" x 3" back-to-back. The interior of this jar is grooved and hold slides in erect position. Domed and shallow thread screw cap provides protection to the slides.
essco glass molded vials crimp neck Measuring Jugs, Graduated
Polypropylene construction with molded, raised graduations and sturdy reinforced handle. These jugs are translucent, have good chemical resistance and are completely autoclavable. Avialable in 250ml, 500ml, 1000ml and 2000ml capacities.
essco glass molded vials crimp neck Measuring Cups, Graduated
These superior quality polypropylene measuring cups are used for syrup bottles in pharmaceutical industry. Standard capacities are 5ml, 10ml, 15ml and 25ml but custom sizes with company logos can also be made.
essco glass molded vials crimp neck Measuring Cup Conical, Graduated
Made of polypropylene, these graduated conical cups are autoclavable, easy to read, pour, transfer and measure with. Conical shape with hexagonal base design provides great stability in handling and measuring liquids. Available in 10ml, 15ml, 25ml, 50ml, 125ml and 200ml capacities.
essco glass molded vials crimp neck Measuring Cylinders, Graduated
These superior quality polypropylene autoclavable graduated cylinders are ideal for the safe and accurate measurement of all types of liquids. These cylinders offer a wide rim and a tapered pour spout for easy filling and pouring. The non-wetting interior surface eliminates concave menisci, providing more accurate measurements. The wide pentagonal shaped base provides stability and makes the cylinder roll-resistant. Available in capacity ranging 10ml-2000ml.
essco glass molded vials crimp neck Desiccator, Vacuum
This is a all clear desiccator with transparent polycarbonate cover and base. Durable with high impact resistance. Will safely withstand high vacuum pressures. Ceramic plate permits the use of incandescent crucibles. Available sizes are 150mm, 200mm, 250mm, 300mm.
essco glass molded vials crimp neck Flask Holder, Round Bottom
This polypropylene holder has circular steps which provides excellent support to the round bottom flask at every point of contact. This holder can hold round bottom flasks of up to 10 liters capacity. Stackable and steam autoclavable.
essco glass molded vials crimp neck Flask, Erlenmeyer
These wide-mouth Erlenmeyer flasks comes with a screw cap but can also be used without screw cap. Chemical resistant and autoclavable to 135 degrees C. Available in 100ml, 250ml and 500ml.
essco glass molded vials crimp neck Flask, Volumetric
These polypropylene translucent volumetric flasks create no meniscus. They are individually calibrated at 20 degrees C to Class B standards. Thick walls eliminate distortion. Thin necks make final measurement precise. Autoclavable. Chemically non-absorbent. No wetting. Screw caps are included. Economical and Sturdy. Available in capacity ranging 25ml to 1000ml.
essco glass molded vials crimp neck Funnel Holder
These polypropylene corrosion-free funnel holders can hold funnels with diameters 75mm to 150mm. The extra plate provided can be placed to hold funnels having diameters 25mm to 75mm. Two tapered wedges are provided to ensure firm grip on rods measuring 10mm - 14mm diameter.
essco glass molded vials crimp neck Funnel Holder, Separatory
This non-corrosive separating funnel holder, molded in polypropylene, has a front opening which provides clear view of the solution and allows unobstructed placement of separating funnels. Two tapered wedges are provided to ensure firm grip on rods measuring 10mm - 14mm diameter.
essco glass molded vials crimp neck Funnel, Powder
This heavy-duty polypropylene powder funnel feature a large bore, which make them ideal for use with powder, large particles and viscous liquids. External ribbing is molded into the funnel to prevent air lock. They are angled at exactly 60 for rapid filtration. Available in Top Diameter of 65mm, 80mm, 100mm and 150mm.
essco glass molded vials crimp neck Funnel, Analytical
These heavy-duty polypropylene (PP) analytical funnels are perfect for use in Analytical Chemistry applications. They feature long, narrow stems, which make them ideal for use with liquids. The analytical funnels have internal and external ribbing which helps to prevent air lock. They are angled at exactly 60 for rapid filtration. These analytical funnels can accommodate standard filter paper sizes. Available in Top Diameter of 35mm, 50mm, 62mm, 75mm, 100mm.
essco glass molded vials crimp neck Funnel, Buchner
These polypropylene 2-piece funnels are light-weight, easy to clean and autoclavable. The top portion snaps into the lower one, forming a vacuum seal that does not require greasing. The base of the top portion has a perforated filter plate. Available in top outside diameter of 70mm, 90mm and 110mm.
essco glass molded vials crimp neck Funnel, Seperatory
Providing excellent clarity and strength, the pear-shaped polypropylene separating funnel has a leakproof threaded screw cap. The polypropylene stopcock, fitted with self-lubricating PTFE plug, is push-fitted to the stem of the funnel. Available in 100ml, 250ml and 500ml.
Gas Jar Gas Jar
These transparent jars can be used for multi purpose in a school laboratory. Provided with a tight fit cap. Size 50mm diameter x 150 Height. Kipps_Apparatus_S.jpg
Kipps Apparatus Kipps Apparatus
Am ideal alternative to glass apparatus, this Kipps Apparatus is made of polyethylene and has three main portions. The top portion is fitted with a thistle funnel and a bulb structure through which dilute acid can be poured which reacts with metal sulphide in the base of the Apparatus. H2S gas then evolved collects in the middle dome from where it can be released through a leak-proof stopcock fitted with a self lubricating PTFE plug. The base is provided with a residual outlet fitted with a cap for easy cleaning. Available in 500ml and 1000ml capacity.
essco glass molded vials crimp neck PVC Tubing
This Non toxic Polyvinylchloride (PVC) tubing is made from high grade material and is very flexible and will retain its bore on bending. It can be sterilised up to 121 Deg C. Same tubing is also available with terylene mesh reinforced wall to give it extra strenght. Wall thicknesses of these tubings vary with internal diameter which ranges from 6mm to 20mm.
Stop Cock 2 Way Stop Cock 2 Way
Absolutely leak-proof, these Polypropylene Stop cocks are fitted with a PTFE plug and have serrated tabulations that accept from 6 mm to 10 mm tubing.
Stop Cock 2 Way Stop Cock 3 Way
Absolutely leak-proof, these Polypropylene Stop cocks are fitted with a PTFE plug and have serrated tabulations that accept from 6 mm to 10 mm tubing.
Storage Boxes Storage Box
These extra wide mouth square boxes are excellent option for storage of different powdered reagents and other material in the laboratory. Square shape of these boxes help in saving shelf space. Available in 500ml and 1000ml capacity.
Syringes, Disposable Syringes, Disposable
These syringes have graduated barrels and are available in 2ml, 5ml, 15ml, 10ml and 20ml capacities. Graduated in 1ml increments, Supplied in packs of 100.
essco glass molded vials crimp neck Tray, Carrier
These steam autoclavable, polypropylene molded tray has a built-in handle for easy carrying of reagents and other laboratory ware using one hand. Size 380x240x115mm.
essco glass molded vials crimp neck Basket Draining
Unbreakable yet lightweight polypropylene basket suitable for rinsing, draining and storage of glassware especially long cylinders and tubes. Units stack when not in use to save space. Good chemical resistance and autoclavable to 121C. Size available 160x160x160mm and 140x120x110mm.
essco glass molded vials crimp neck Tray, Draining
Strong lightweight rectangular basket suitable for use as a draining as well as for autoclave. Units stack when not in use to save space. Good chemical resistance and autoclavable to 121C. Size 400x400x100mm.
essco glass molded vials crimp neck Tray, Gel Staining
This polypropylene Staining Tray helps in staining, fixing, de-staining and handling fragile electrophoresis gels and membranes. Both tray and cover will resist temperature from -70 C to +70 C. The LDPE plug provides a leak-proof seal and allows easy liquid drainage. Dimensions: 5" x 5" x 2".
essco glass molded vials crimp neck Tray, Laboratory Multipurpose
This multi-purpose polypropylene moulded trays can be used for sterilizing, drying glassware, porcelain ware and other laboratory supplies. These steam autoclavable trays have tapered walls designed for nesting. Availabe sizes 38 x 30 x 7.5cm and 45x35x7.5cm
essco glass molded vials crimp neck Tray, Stacking
These rectangular, tapered edged, autoclavable, lightweight and unbreakable trays provides easy handling and stacking of laboratory ware. Easy to clean. Size 38x35x13cm.
essco glass molded vials crimp neck Trough, Pneumatic
Strong Plastic Round Trough. For general lab use, like collection of gases etc. Available in sizes (diameter x height): 18cmx6cm, 20cmx10cm and 25cmx10cm.